Inflatable Hot Tub for a Holiday Let or Airbnb: Guest Use, Cleaning Between Guests and House Rules

    Disclosure: As an Amazon Associate, this site may earn from qualifying purchases made through links on this page, at no extra cost to you.

    A hot tub is one of the most popular features a holiday let can offer. Guests picture themselves soaking under the stars after a day out, and a well-kept inflatable tub can genuinely set a listing apart. But a tub in a holiday let is not the same as a tub in your own garden. The people using it change every few days, nobody using it is responsible for its upkeep, and the person who has to deal with the consequences of a missed test or a dirty filter is you — often from a distance, and often on changeover day with new guests arriving in a few hours.

    This guide is for owners and hosts who already have, or are considering, an inflatable hot tub at a holiday let or Airbnb. It covers how to set up guest use sensibly, what cleaning between guests should involve, how to write house rules guests will follow, and where the limits of your responsibility sit. It is general product information, not legal, insurance, or medical advice, and it does not replace your own manual, your local regulations, or advice from your insurer.

    Why guest use is different from private use

    In your own home, you know who used the tub, for how long, and what went into the water. You know when it was last tested, when the filter was last rinsed, and whether anyone wore sunscreen or lotion into the water. At a holiday let, you know none of that. A group of six guests can put more load on the water in one evening than a couple puts on it in a week. Sunscreen, fake tan, hair products, and swimwear washed in detergent all add to the water. Guests may not shower before soaking, may stay in far longer than you would, and may not tell you if the water looked cloudy or smelled off.

    That difference matters because an inflatable tub holds a relatively small volume of water, and warm water uses sanitiser quickly. A tub that was perfectly balanced on Friday morning can be out of balance by Saturday night after heavy guest use. The cleaning and testing routine between stays is therefore not a nice extra — it is the core of running a tub for guests, and it needs to be planned into every changeover.

    Before you offer a tub to guests at all

    Before a tub goes live in a listing, there are a few decisions to make that are much harder to fix later.

    First, check the practicalities of the property. Is there a suitable outdoor power supply for the tub, installed to your manual and local regulations? Bestway SaluSpa manuals strictly prohibit extension cords and multi-plug adaptors, and the ground-fault protection must be tested before each use. If the supply cannot reach a suitable grounded outlet, that work is for a qualified electrician — never improvise a longer cable or bypass a safety device. Our guide to electrical and GFCI safety explains the rules in more detail.

    Second, talk to your insurer and check your local rules. Some insurance policies and local authorities have conditions about hot tubs in holiday lets, including supervision, signage, and maintenance records. This article cannot tell you what your policy requires — only your insurer can — but do not assume a standard home policy covers guest use of a hot tub. Ask before the first booking, not after the first problem.

    Third, read your tub manual with guest use in mind. Check the maximum number of bathers, the temperature ceiling, and the manufacturer’s guidance on water care. The CDC advises that hot tub water should not exceed 104°F, that free chlorine should be at least 3 ppm and bromine between 4 and 8 ppm, and that pH should sit between 7.0 and 7.8. Children under five should not use hot tubs, and pregnant guests should talk to a healthcare provider before use. Those are the baseline numbers to build your routine around, and they should appear in your house rules.

    The between-guests routine

    Every changeover should follow the same steps, in the same order, with a written record. A checklist protects you twice: it makes sure nothing is missed on a rushed day, and it gives you a record that the routine was actually followed.

    Start by looking at the water. Is it clear, cloudy, or green? Does it smell strongly of chemicals or smell stale? Cloudy water after heavy use is common, and our guide to cloudy water causes and fixes explains the fix order. Green water points to algae and needs a different recovery process. If the water will not clear, or you cannot restore safe sanitiser levels, drain and refill rather than sending new guests into water you cannot confirm is properly treated.

    Test the water properly. Test strips are quick and practical for a changeover routine, and our comparison of test strips, liquid kits, and digital testers can help you choose the method you will actually use consistently. Check sanitiser and pH at minimum, and record the readings with the date. A spare set of test strips is worth keeping at the property so a changeover is never delayed by an empty tub of strips: Hot Tub Test Strips.

    Next, check and clean the filter. Rinse the cartridge, check that it is seated correctly, and replace it if the pleats are matted or damaged. A dirty filter is one of the most common reasons a tub goes cloudy, and it is also one of the easiest things to fix. Keep a spare cartridge at the property so a cleaning day does not become a day without filtration: Filter Cartridge Type VI. Always check compatibility with your exact tub model before ordering.

    Then clean the surfaces guests touch: the rim, the headrests if fitted, the control panel area, and the cover. Wipe down the waterline, where oils and residues collect, and check the cover for damage or waterlogging. A cover that no longer fits properly lets debris in and heat out, and it is also a safety issue — a damaged cover should be replaced, not patched over. Our guide to hot tub safety for children and pets covers cover safety in more detail.

    Finally, top up or adjust chemicals following your product instructions and your manual, run the filter so the treated water circulates, and retest before the next guests arrive. Do not leave the tub in a state where you are hoping the numbers will come right by themselves. If the water needs a shock treatment, follow the guidance in our shocking guide, and do not let guests in until sanitiser has returned to a safe range.

    When to drain and refill between guests

    One of the hardest judgement calls in a holiday let is when to drain the water rather than treat it. Draining takes time: the tub has to empty, be cleaned, and refill and heat before the next guests arrive. On a same-day changeover that may not be possible, which is why planning matters.

    As a rule, drain and refill when the water will not hold its balance, when cloudiness returns almost immediately after treatment, when the water smells strongly unpleasant, or when you cannot restore safe sanitiser levels. Our guide to when to change hot tub water and our guide to draining an inflatable hot tub cover the timing and the practical steps. Old water loaded with dissolved solids will not stay clear no matter how much you add to it.

    If your changeover window is tight, build the possibility of a drain into your booking calendar. A gap day between bookings is not lost income if it is the day that keeps the tub usable. Some hosts schedule a full drain and refill every few bookings regardless, so the water never reaches the point where it needs one urgently. That is a reasonable approach, and it is easier to plan than an emergency drain on a Saturday afternoon.

    House rules guests will actually follow

    House rules work best when they are short, specific, and explained in terms of the guest’s own experience rather than as a list of prohibitions. Guests do not read a page of small print. They read a short card by the tub, and they follow rules that make sense to them.

    Keep the rules to the essentials: shower before getting in; no glass near the tub; a maximum number of bathers; a maximum temperature, with a note that the tub should not be turned up beyond it; no children under five in the tub, and children supervised at all times; no lotions, oils, or fake tan immediately before soaking; no food in the water; replace the cover after use; and report any problem — cloudy water, a strange smell, a tripped safety device — rather than trying to fix it. Put the rules in the listing, in the welcome information, and on a laminated card by the tub, so guests see them more than once.

    Avoid rules that ask guests to do maintenance. Asking guests to test the water or add chemicals sounds helpful, but it creates two problems: guests may do it wrong, and you cannot verify what they did. Keep testing and dosing as the host’s job, and make the guest rules about behaviour in and around the tub only.

    One rule deserves emphasis: never tell guests to reset, bypass, or work around a tripped safety device, and never suggest they can fix an electrical problem themselves. If the ground-fault protection has tripped, the tub stays off until a qualified person has checked it. Write that into the rules and into your own changeover checklist.

    Cleaning the tub itself between guests

    Beyond the water, the tub needs physical cleaning between stays. Wipe the interior surfaces with a cloth and a cleaner suitable for your tub material, following your manual — never use harsh or abrasive products, and never use a cleaner that leaves a residue in the water. Rinse thoroughly, and pay attention to the waterline, the seating area, and any jets or outlets where residue collects.

    Check the tub for damage at the same time. Look for soft spots, slow leaks, or a tub that is losing air. A slow leak that is easy to ignore at home becomes a problem when guests arrive to a half-deflated tub, and our guide to leak and puncture repair covers what to look for. Check the pump and heater unit as well: is it running normally, are there any error codes on the display, and is the water heating as expected? If something is wrong, it is far better to take the tub offline for a booking than to let guests discover the problem.

    Record-keeping: the unglamorous part that matters most

    Keep a simple log for the tub. For each changeover, record the date, the water test readings, what chemicals were added, whether the filter was cleaned or replaced, whether the water was drained, and any problems found. A notebook at the property or a simple shared document both work. The log keeps the routine consistent when different people do the changeover, shows a pattern when something keeps going wrong, and gives you a record if a guest ever raises a concern about the water.

    Photograph the tub on changeover day as well. A quick photo of clear water, a clean tub, and the test strip reading takes seconds and gives you a dated record of the tub’s condition when each set of guests arrived.

    Keep your chemical and spare-part stock at the property topped up, and keep chemicals stored safely, locked away from guests and children. Our guide to storing hot tub chemicals safely covers the basics. Never leave chemicals where guests can reach them, and never leave dosing to guesswork — label everything clearly for whoever does the changeover.

    What to do when guests report a problem

    Guests will sometimes message you about the tub: cloudy water, a slow heater, a code on the display, or someone feeling unwell after soaking. Have a plan before it happens. For water-quality reports, ask guests to stay out until you can test the water yourself. Do not diagnose from a photo, and do not tell guests to add chemicals themselves. For health concerns, take them seriously and direct the guest to a healthcare provider — do not offer medical advice, and record what was reported and what you did. For equipment problems, check the manual’s troubleshooting guidance and our troubleshooting guide for first checks such as the filter cartridge and water level. If the problem persists, contact the manufacturer or a service centre, and do not let guests keep using a tub that is not working properly.

    A realistic changeover checklist

    Pulling this together, a workable between-guests routine looks like this:

    1. Look at the water: clear, cloudy, or green, and note any smell.
    2. Test sanitiser and pH, and record the readings with the date.
    3. Rinse or replace the filter cartridge, and check it is seated correctly.
    4. Clean the waterline, rim, and touch surfaces, and check the cover.
    5. Adjust chemicals following product and manual instructions, run the filter, and retest.
    6. Check the tub for leaks, soft spots, and damage, and check the pump and heater are running normally.
    7. Check the area around the tub, the path, and the lighting.
    8. Confirm the house rules card is in place and the cover is on.
    9. Photograph the tub and log the changeover.

    If any step fails — the water will not balance, the filter is damaged, the safety device has tripped — the tub stays closed to guests until it is fixed. That is the hardest part of running a tub for guests, and it is also the most important. A closed tub disappoints a booking; an unmaintained tub risks far worse.

    Is it worth it?

    An inflatable hot tub can be a genuine draw for a holiday let, and many hosts run one successfully for years. The ones who do it well share the same approach: they treat the tub as a managed facility, not a piece of garden furniture. They build the changeover routine into the booking calendar, they keep records, they write short rules guests actually read, and they close the tub without hesitation when the water or the equipment is not right.

    Start with the basics: a sound power supply, a clear routine, a written log, and house rules that fit on one card. Get those right before the first booking, and the tub becomes an asset instead of a liability.

    Related guides

    Share.
    Leave A Reply