Inflatable Hot Tub With Seats vs Without: Benches, Loungers and Floor Space

    Disclosure: As an Amazon Associate, this site may earn from qualifying purchases made through links on this page, at no extra cost to you.

    Most inflatable hot tubs have an open floor: you sit on the bottom of the tub, with your legs stretched out in front of you, and everyone finds their own spot. Some models add built-in seating — a bench along one side, a raised seat, or a lounger shape moulded into the floor. It sounds like a small difference, but it changes how the tub feels to use, how many people fit comfortably, and how much room you have to move.

    This guide compares the two layouts honestly: what built-in seats give you, what they take away, and who each layout suits. It is about seating, not about the shape of the tub or the number of people it holds — our comparisons of round versus square tubs and four-person versus six-person tubs cover those subjects separately.

    The open floor: the default layout

    An inflatable tub without built-in seats is a simple, open space. You sit on the floor of the tub, usually with your back against the wall, your legs stretched out, and your shoulders above the water. Everyone sits at the same level, and everyone can shift position freely — stretch out, sit cross-legged, turn to face a different direction, or move to the other side of the tub.

    That freedom is the open floor’s main strength. It suits groups, because people can arrange themselves however they like, and it suits different body shapes, because there is no fixed seat that fits some people and not others. It also suits families, because children can move around more easily, and it suits anyone who likes to stretch out rather than sit upright.

    The open floor has a second strength: it is easy to clean. There are no seat shapes to trap debris, no corners behind a bench where dirt collects, and no raised areas that are hard to reach with a cloth. When you drain and clean the tub, an open floor is the quickest layout to wipe down.

    The drawback is comfort for some people. Sitting on the floor of a tub, with no back support other than the tub wall, can be uncomfortable over a long soak, especially for anyone with a sore back, stiff knees, or difficulty getting up from a low seat. The water depth matters here: in a deeper tub, sitting on the floor puts your shoulders well below the waterline, which some people find too deep; in a shallower tub, it can feel just right. But there is no way to raise yourself up without adding something to sit on, and that is where built-in seats — or add-on seats — come in.

    Built-in benches: a place to sit upright

    A bench seat in an inflatable tub is a raised section, usually along one side, that lets you sit upright with your feet on the floor of the tub and your back against the wall. It raises you higher in the water than sitting on the floor, so your shoulders sit above the waterline more comfortably, and it gives you a defined place to sit rather than a space to find.

    For many owners, that is a genuine improvement. Sitting upright is more comfortable for conversation, for reading, and for longer soaks. It is easier to get in and out of the tub from a raised seat than from the floor, which matters for anyone with limited mobility or stiff joints. And it gives the tub a more structured feel — less like a paddling pool, more like a spa.

    The trade-off is floor space. A bench takes up room that would otherwise be open water, and it reduces the usable floor area for everyone else. In a tub that is already snug for its stated number of bathers, a bench can make it feel noticeably smaller, because the people who are not on the bench have less room to stretch out. The bench also creates a fixed layout: the seats are where they are, and you cannot rearrange them. If the bench is on the side where you would rather stretch your legs, you cannot move it.

    Benches also add cleaning work. The area under and behind a bench is harder to reach, and debris and oils can collect there. When you clean the tub, you need to pay attention to those spots, and when you drain the tub, you need to make sure water does not sit in a hollow behind the seat.

    Loungers: lying back in an inflatable tub

    Some models go further than a bench and offer a lounger — a reclined seat shape that lets you lie back with your legs raised and your head supported. A lounger is the most comfortable seating position in an inflatable tub for many people, because it supports your whole body and lets you relax fully.

    The trade-offs are larger, too. A lounger takes up more floor space than a bench, and it usually serves one person — the person lying on it — while everyone else uses the remaining space. In a small tub, a lounger can dominate the interior, leaving little room for anyone else. Loungers also suit some body shapes better than others: a lounger that fits a tall person may leave a shorter person with their head too low or their feet unsupported, and vice versa.

    A lounger is also the hardest seating shape to clean, because it has curves and hollows where water and debris collect. And if the lounger is part of the inflatable structure, it needs to be inflated properly and checked for soft spots like the rest of the tub. A lounger that has lost air is uncomfortable and can make the tub feel uneven.

    For most buyers, a lounger is a feature to consider only if the tub is large enough that the lounger does not crowd everyone else, and only if you are the person who will use it most. For a family tub or a tub used by a group, a bench or an open floor is usually more flexible.

    Add-on seats: the middle ground

    If your tub has an open floor and you want a raised seat, you do not necessarily need to buy a different tub. Add-on seats — inflatable seat cushions, booster seats, and spa pillows that sit on the floor of the tub — can raise you up without changing the tub itself. They are removable, so you can use them when you want them and take them out when you want the full floor space back, and they can be moved to whichever side of the tub suits you.

    Add-on seats have their own drawbacks. They can move around in the water, especially if they are not weighted or secured, and they need to be cleaned and dried after use so they do not develop a smell or grow anything unpleasant. They also take up floor space when they are in use, just like a built-in bench, though you can remove them when they are not needed.

    A suitable inflatable hot tub seat cushion is available here: Inflatable Hot Tub Seat Cushion. Check the size against your tub and make sure it is designed for hot tub use — a general inflatable cushion may not be made from materials that cope with warm, chlorinated water.

    Add-on seats are a good way to try raised seating before committing to a tub with built-in seats. If you find you use the cushion every time, a built-in bench may be worth it next time you buy. If you find you rarely bother with it, the open floor was the right choice all along.

    Who suits which layout

    There is no single right answer, but some patterns are worth noting.

    An open floor suits groups and families best, because it is flexible, easy to clean, and gives everyone room to arrange themselves. It suits anyone who likes to stretch out, and it suits owners who want the simplest tub to maintain. If you mostly soak with friends or family, and you value space over structure, an open floor is hard to beat.

    A bench suits couples and smaller groups best, because the loss of floor space matters less when there are fewer people, and the comfort of sitting upright matters more. It suits anyone who finds getting up from the floor difficult, anyone with a sore back who prefers an upright seat, and anyone who likes a more structured, spa-like feel. If you mostly soak with one other person, and you like to sit and talk rather than stretch out, a bench is worth considering.

    A lounger suits a single regular user best — someone who soaks alone most of the time and wants the most comfortable position for themselves. It is less suited to a shared family tub, where the space it takes up is needed by others.

    Add-on seats suit anyone who is unsure. They let you try raised seating without buying a new tub, and they let you change your mind from one soak to the next.

    What to check before you choose

    If you are buying a tub with built-in seats, check a few things that are easy to miss. Sit in the tub if you can, or at least look at the seating layout carefully in the product images: where are the seats, how many are there, and how much open floor is left? Imagine the tub with its stated number of bathers in it — will everyone have room, or will the seats make it feel crowded?

    Check the water depth at the seat. A seat that leaves you sitting too high, with your chest well out of the water, will feel cold and exposed. A seat that leaves you too low is no better than the floor. The right seat puts your shoulders just above the waterline when you are sitting upright, and that is hard to judge from a picture — which is why seeing the tub in person, or reading owner descriptions of the seating, is worth the effort.

    Check the cleaning implications. Ask yourself whether you will actually clean behind and under the seats regularly. If the answer is no, an open floor will stay cleaner with less effort, and a tub that is hard to clean is a tub that will go cloudy sooner.

    And check the tub’s overall size. A bench in a large tub is a comfort feature; a bench in a small tub can be a space problem. The bigger the tub, the less the seats cost you in floor space, and the more they add in comfort. That is why seating is more common, and more successful, in larger models.

    The short version

    Built-in seats trade floor space for comfort and structure. An open floor gives you flexibility, room, and the easiest cleaning. A bench gives you an upright, comfortable seat and easier access, at the cost of floor space and a fixed layout. A lounger gives you the most comfortable single position, at the cost of the most space. Add-on seats give you a reversible middle ground.

    None of these is better in the abstract. The right layout is the one that matches how you actually use the tub: who soaks, how many of you there are, and whether you stretch out or sit up. If you are still deciding between inflatable and hard-shell tubs, our comparison of inflatable versus hard-shell is worth reading, because hard-shell spas are built around moulded seating in a way inflatable tubs are not. And if you are comparing brands, our Intex versus Bestway guide covers the two main families. Choose the layout that fits your soak, not the one that looks best in a photograph, and the tub will feel right every time you get in.

    Related guides

    Share.