Inflatable Hot Tub Pre-Delivery Checklist: What to Have Ready Before It Arrives

    Disclosure: As an Amazon Associate, this site may earn from qualifying purchases made through links on this page, at no extra cost to you.

    Ordering an inflatable hot tub is the exciting part. The box arrives, you open it, and within hours you are looking at a new tub in the garden. What turns that excitement into frustration is discovering, after the box is open, that the spot is not level, the power supply is too far away, the hose does not reach, or the chemicals you need are still in a delivery van somewhere else.

    A little preparation before delivery day avoids all of that. This checklist covers what to have ready before the tub arrives: the spot, the surface, the power, the water, and the supplies for the first week. It is about readiness, not about the setup itself — once the tub is unboxed, our guide to first setup takes over.

    Choose and prepare the spot

    The first decision is where the tub will go, and it is worth making before delivery day rather than on it. A filled inflatable tub is heavy, and once it is full of water it is not something you can drag to a better spot. Choose the location now, and prepare it now.

    Look for a flat, level area with good drainage. A tub that is not level will not heat or circulate evenly, and water will sit deeper on one side than the other. Check the ground with a spirit level if you have one, and look at the spot after rain: if water pools there, it is not a good place for a tub. Our placement guide covers ground preparation, surface, drainage, and power in detail, and it is worth reading before you settle on a spot.

    Think about what is under the tub. Grass is soft and uneven, and it can become muddy under a tub. A patio, decking, or a prepared base is usually better, provided it is level and can support the weight. Many owners use a ground mat or insulation mat under the tub to protect the base and to add a little insulation from the cold ground. A suitable ground mat is available here: Hot Tub Ground Mat. Check the size against your tub’s footprint before ordering.

    Also think about what is around the tub. You need room to get in and out safely, room to lift the cover fully, and room to reach the pump and heater unit. You need a clear path from the house, ideally one that is safe at night and not slippery when wet. And you need somewhere to put the cover when it is off, towels, and a dry place for clothes. Walk the route yourself and imagine doing it barefoot in the dark — if it feels awkward now, it will feel worse when the tub is there.

    Finally, check the space the box needs. The delivery box is large, and you will need room to open it, lay out the parts, and inflate the tub. Clear the area before delivery day, and make sure the delivery driver can get the box to the garden or at least to a door near it.

    Sort the power supply before the tub arrives

    Power is the item most often left until delivery day, and it is the one that can stop you entirely. An inflatable tub needs a suitable outdoor power supply, and the requirements are set by your manual and local regulations — not by what is convenient.

    Check the distance from the tub’s spot to the nearest suitable outdoor outlet. Bestway SaluSpa manuals strictly prohibit extension cords and multi-plug adaptors, and the ground-fault protection must be tested before each use. If the outlet is too far away, or if there is no suitable outdoor outlet at all, that is a job for a qualified electrician, and it needs to be done before delivery day, not after. Our guide to electrical and GFCI safety explains the rules in full.

    Do not plan to improvise. Do not plan to run a cable through a window, borrow an indoor socket with an extension lead, or bypass a safety device. None of those are acceptable, and none of them will be fixed by hoping for the best on the day. If the power is not ready, delay the delivery until it is.

    Also check that the outlet is working. Plug something else into it, check that it is switched on, and make sure you know where the relevant breaker or fuse is in the house. Finding out the outlet is dead after the tub is inflated and half full of water is a miserable experience.

    Plan the water: how it gets in, and how it gets out

    Filling the tub takes a large volume of water and a fair amount of time, and it is worth planning the route before the tub arrives. If you have an outdoor tap, check that it works, check that the hose reaches from the tap to the tub’s spot, and check the hose for cracks or damage. If you do not have an outdoor tap, read our guide to filling without one and sort out the adapter and hose route in advance — do not discover on delivery day that the hose does not fit your kitchen tap.

    Check the hose length against the actual route, not a straight line. The hose has to go through a door or window, around corners, and across the garden, and it needs slack so it is not pulling at the tap. If the hose is too short, buy a longer one before delivery day.

    Think about draining as well. A tub needs to be drained for water changes, and the water has to go somewhere. Check where the water will run to, and make sure it will not flood a neighbour’s garden, a path, or a low spot by the house. Our guide to draining an inflatable hot tub covers the options. If your garden has nowhere for the water to go, work that out before the first fill, not after the first water change.

    Buy the first-week supplies now

    The tub will need chemicals and testing supplies from the first day, and you do not want to be waiting for a delivery while a tub full of untreated water sits in the garden. Buy these before delivery day:

    • A test method you will actually use. Test strips are quick and practical for most owners, and our comparison of test strips, liquid kits, and digital testers can help you choose. A spare set of test strips is worth having from the start: Hot Tub Test Strips.
    • Sanitiser and balance products for your tub. What you need depends on whether you are using chlorine or bromine and on your water, and our beginners guide to hot tub chemicals explains the starting routine. Buy the products your manual and your water require, and read the instructions before the tub arrives.
    • A spare filter cartridge. The filter is the tub’s main tool for keeping the water clear, and a spare means a cleaning day does not become a day without filtration. Check compatibility with your exact tub model before ordering: Filter Cartridge Type VI.
    • A cover, if one is not included. Check whether your tub comes with a cover, and if it does not, buy one before delivery day. A tub without a cover loses heat fast, collects debris, and is a safety risk. Our guide to whether you need a cover explains why it matters.
    • Towels, a mat for the path, and a place to store chemicals safely. Chemicals should be stored in a cool, dry place, locked away from children, and never left where guests or children can reach them.

    Do not buy everything on the shelf. Start with the basics — test strips, sanitiser, balance products, and a spare filter — and add other products only when you know you need them. A shelf full of products you do not understand is not preparation; it is clutter.

    Check the delivery itself

    A few practical checks about the delivery will save trouble on the day. Confirm the delivery date and the time window, and make sure someone will be home. Check whether the delivery is to the doorstep or to the garden, and whether the driver will help move the box. The box is large and heavy, so have a second person available if you can.

    Inspect the box when it arrives. Check for damage, and if the box is crushed, torn, or wet, photograph it before you open it and check the contents carefully. If anything is missing or damaged, contact the seller straight away rather than trying to set the tub up with a missing part.

    Measure the space the box will need to get through. Check gate widths, door widths, and any tight corners between the delivery point and the tub’s spot. A box that does not fit through the gate is a problem best discovered before the driver leaves, not after.

    If you rent your home, check your tenancy terms and landlord permission before the tub is delivered. Our guide to inflatable tubs in a rented home covers the questions to ask. It is far easier to get permission before the tub arrives than to explain it afterwards.

    Know the basics before you start

    Read the manual before delivery day. That sounds obvious, but many owners open the manual for the first time with the tub half inflated. Reading it in advance tells you the maximum number of bathers, the fill levels, the temperature ceiling, and the manufacturer’s water-care guidance. The CDC advises that hot tub water should not exceed 104°F, that free chlorine should be at least 3 ppm and bromine between 4 and 8 ppm, and that pH should sit between 7.0 and 7.8. Children under five should not use hot tubs, and pregnant users should talk to a healthcare provider before use. Those numbers are worth knowing before the first soak, not after.

    Also decide who will be responsible for the tub’s routine. Testing, filter cleaning, and water changes need to happen on a schedule, and our maintenance schedule can help you build one. If more than one person in the household will use the tub, agree who does what, so the routine does not fall between two people.

    The pre-delivery checklist

    Here is the whole list in one place. Tick each item off before the tub arrives:

    The spot

    • Location chosen, flat and level, with good drainage
    • Ground mat or prepared base in place
    • Room to get in and out, lift the cover, and reach the pump
    • Clear, safe path from the house, with lighting for evening use
    • Space to open the box and lay out the parts

    Power

    • Suitable outdoor outlet within reach of the tub’s power cord
    • No extension cord needed, and none planned
    • Outlet tested and working, and you know where the breaker is
    • Any electrical work by a qualified electrician completed before delivery

    Water

    • Outdoor tap working, or indoor tap and adapter sorted
    • Hose long enough for the actual route, in good condition
    • Drainage route planned for water changes

    Supplies

    • Test strips or other test method bought
    • Sanitiser and balance products bought, instructions read
    • Spare filter cartridge bought and checked for compatibility
    • Cover confirmed included or bought separately
    • Safe chemical storage arranged

    Delivery and paperwork

    • Delivery date and time confirmed, someone home
    • Access route for the box checked — gates, doors, corners
    • Manual read in advance
    • Landlord permission confirmed if you rent
    • Maintenance routine agreed with anyone else in the household

    If you can tick every box, delivery day will be straightforward: open the box, inflate, fill, balance, heat, and soak. If you cannot tick them all, sort the missing ones first. A tub that arrives before its spot, its power, or its chemicals are ready is not a head start — it is a box in the garden and a list of jobs that should have been done already. A day of preparation before delivery saves a week of frustration after it.

    Related guides

    Share.

    1 Comment

    1. Pingback: Hot Tub With Seats vs Without: Benches, Loungers & Space

    Leave A Reply